PROCEDURES ON HOW TO FLASH/ ROOT ANDRIOD PHONE USING PC

PROCEDURES ON HOW TO FLASH/ ROOT ANDRIOD PHONE USING PC

You can easily flash stock ROM or custom ROM Or root your andriod phone using smart phone flash tool (sp flash tool) on windows computer.

Requirements: Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.


Flash Stock ROM/ Root Andriod Phone 

Step 1 : Download and install the right Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download  the Stock ROM or Custom ROM that you want to Flash on your Android Smartphone and extract it on your Computer.
In the case of rooting, download and extract TWRP.zip, Ensure you download the right TWRP meant for your device to avoid stories that touches the heart. 

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see some files:

Step 5: Now Open Flash_tool.exe (you will find this from the extracted files in Step#4).

Step 6: Once Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock ROM folder).
In the case of rooting, you will find the scatter file in TWRP folder.

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detect your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.
Note: flashing stock or custom ROM on any Andriod phone ends in step 13.
If you want to root your Andriod phone, ensure you continue by moving over to step 13.

Step 13: Download Magisk.zip OR SuperSU.zip, After which move the aforementioned into the memory card of your phone.
Switch off your phone, then press volume key + button and power button simultaneously to boot into TWRP recovery, locate the Magisk.zip or SuperSU.zip then tap of Flash.
Wait for a few seconds or minutes as the case may be, you will see a message on your screen saying it was successful.


Congratulations, Now your Android Smartphone is successfully running on your desired ROM OR you've successfully rooted your phone.


      #gantechs